chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Subframe > < Steering - Front End Clunk/Rattle/Knock On Bumps|Page 6997
Page 2
background image

Notice:  Refer to Fastener Notice in Service Precautions.

1. Connect the stabilizer link to the strut assembly.

^

Tighten the stabilizer link nut to 65 Nm (48 ft. lbs.).

2. Connect the stabilizer link to the stabilizer shaft.

^

Tighten the stabilizer link nut to 65 Nm (48 ft. lbs.).

3. Install the front wheel.
4. Lower the vehicle.

Subframe > < Steering - Front End Clunk/Rattle/Knock On Bumps|Page 6997