Malibu V6-3.5L VIN 8 (2004)
Seals and Gaskets: Service and Repair
Case Side Cover Seal Replacement
Case Side Cover Seal Replacement
Tools Required
^
J 41227 Output Shaft Sleeve Remover
^
J 41228 Output Shaft Seal Installer
^
J 41102 Axle Seal Installer
Removal Procedure
1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the drive axle assembly.
3. Use a medium screwdriver and a mallet in order to remove the case cover seal.
4. Remove the drive axle retaining clip from the output axle.