Malibu V6-3.5L VIN 8 (2004)
Windshield Washer Reservoir: Service and Repair
Washer Solvent Container Replacement
WASHER SOLVENT CONTAINER REPLACEMENT
REMOVAL PROCEDURE
1. Open the hood.
2. Disconnect the solvent container washer hose from the windshield washer hose.
3. Drain the washer solvent from the washer solvent container.
4. Remove the front fender liner.
5. Disconnect the washer level sensor electrical connector.
6. Disconnect the washer pump electrical connector.
7. Remove the washer solvent container nuts.
8. Remove the washer solvent container from the left frame rail.
9. Remove and transfer the following components from the washer solvent container:
-
The washer pump assembly and seal.
-
The washer level sensor and seal.
-
The solvent container cap
-
The solvent container hose.
INSTALLATION PROCEDURE
1. Install the following components to the washer solvent container:
-
The washer pump assembly and seal.
-
The washer level sensor and seal.
-
The solvent container cap
-
The solvent container hose.
