Malibu V6-3.6L (2010)
3. Using the access hole in the sunroof module cross bar, install the push-pin fastener which secures the rear sunroof water gutter to the roof.
4. Install the sunroof motor/actuator bolts to the base of the sunroof module and tighten to 2 Nm (18 lb in).
5. Connect the front and rear drain hoses to the drain spigots.
6. Install the sunshade. Refer to Sunroof Sunshade Replacement (See: Sun Shade/Service and Repair/Sunroof Sunshade Replacement)
