Malibu V6-3.6L (2010)
10. Remove the brake pad retainers (2) from the disc brake caliper bracket.
11. Remove the brake caliper guide pins (2) from the brake caliper mounting bracket (4).
12. Remove the brake caliper pin boots (3) from the brake caliper mounting bracket (4).
Installation Procedure
1. Apply a thin coat of high temperature silicone lube to the brake caliper guide pin boots.
2. Install the brake caliper pin boots (3) into the brake caliper mounting bracket (4). Do not hammer the caliper pin boots into the bracket. Ensure
that the caliper pin boots are fully seated in the bracket.
3. Install the brake caliper guide pins (2) to the brake caliper mounting bracket (4).