Malibu V6-3.6L (2010)
9. Remove the brake caliper guide pins (2) from the brake caliper mounting bracket (4).
10. Remove the caliper pin boots (3) from the brake caliper mounting bracket (4).
Installation Procedure
1. Apply a thin coat of high temperature silicone lube to the brake caliper guide pin boots.
2. Install the brake caliper pin boots (3) to the brake caliper mounting bracket (4).
3. Apply a thin coat of high temperature silicone lube to the brake caliper guide pins (2).
4. Install the brake caliper guide pins (2) to the brake caliper mounting bracket (4).
5. Install the brake pad retainers (2) to the brake caliper mounting bracket (3).
6. Install the brake pads (1) to the brake caliper mounting bracket (3).
7. Install the brake caliper to the brake caliper mounting bracket.