Malibu V6-3.6L (2010)
7. Inspect the seal on the master cylinder for damage and replace, if necessary.
Ensure the seal is properly positioned on the body of the master cylinder.
8. Install the master cylinder and the EBCM/BPMV and bracket assembly to the vehicle.
9. Install the master cylinder nuts (1) and tighten to 25 Nm (18 lb ft).
10. Raise and support the vehicle.
11. Install the 3 BPMV bracket nuts (1) and tighten to 10 Nm (89 lb in).
12. Install the left front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and
Repair).
13. Lower the vehicle.