Malibu V6-3.6L (2010)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
Crankshaft Balancer Replacement
Special Tools
*
EN-46106 - Flywheel Holding Tool
*
J-38416-2 - Crankshaft Button
*
J-41816 - Crankshaft Balancer Remover
*
J-41998-B - Crankshaft Balancer Installer
*
J-45059 - Angle Meter
Removal Procedure
1. Remove the drive belt. Refer to Drive Belt Replacement (See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair).
2. Install the engine support fixture. Refer to Engine Support Fixture (See: Service and Repair/Removal and Replacement/Engine Support Fixture).
3. Remove the engine mount. Refer to Engine Mount Replacement - Right Side (See: Drive Belts, Mounts, Brackets and Accessories/Engine
Mount/Service and Repair/Engine Mount Replacement - Right Side).
4. Remove the starter. Refer to Starter Replacement (See: Starting and Charging/Starting System/Starter Motor/Service and Repair).
5. Install the EN-46106 - tool through the starter mounting hole.