Malibu V6-3.6L (2010)
8. Remove the engine mount bracket (2).
Installation Procedure
1. Install the engine mount bracket (2).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the engine mount bracket nuts (1) and tighten to 90 Nm (66 lb ft).
3. Install the ABS connector clip to the frame.
4. Install the engine mount bracket (2).
5. Install the lower engine mount bracket bolts (2) and tighten to 90 Nm (66 lb ft).
6. Install the upper engine mount bracket bolts (1) and tighten to 58 Nm (43 lb ft).
7. Lower the vehicle.
8. Remove the engine support fixture. Refer to Engine Support Fixture (See: Service and Repair/Removal and Replacement/Engine Support Fixture
).