Malibu V6-3.6L (2010)
15. Position and install the coolant air bleed hose/pipe clip to the upper intake manifold stud.
16. Install the coolant air bleed hose to the water outlet.
17. Position the coolant air bleed hose clamp (2) at the water outlet.
18. Install the coolant air bleed hose/pipe clip bolt (3) to the upper intake manifold.
Tighten the bolt to 10 Nm (89 lb in).
19. Position the fuel feed line and install the fuel feed line clip to the stud.
20. Install the fuel feed line nut (2).
Tighten the nut to 10 Nm (89 lb in).
21. Connect the fuel feed line (1) quick connect fitting to the fuel rail. Refer to Metal Collar Quick Connect Fitting Service (See: Powertrain
Management/Fuel Delivery and Air Induction/Fuel Line Coupler/Service and Repair/Metal Collar Quick Connect Fitting Service).
22. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement (See: Tune-up and Engine Performance Checks/Air Cleaner
Housing/Air Cleaner Fresh Air Duct/Hose/Service and Repair/Air Cleaner Outlet Duct Replacement).
23. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (See: Powertrain Management/Fuel Delivery and Air