Malibu V6-3.6L (2010)
Heat Shield: Service and Repair
Exhaust Manifold Heat Shield Replacement - Left Side
Exhaust Manifold Heat Shield Replacement - Left Side
Removal Procedure
Warning: Refer to Exhaust Service Warning (See: Service Precautions).
Warning: Refer to Protective Goggles and Glove Warning (See: Service Precautions/Technician Safety Information/Protective Goggles and Glove
Warning).
1. Remove the bank 2 sensor 1 heated oxygen sensor (HO2S). Refer to Heated Oxygen Sensor Replacement - Bank 2 Sensor 1 (See: Powertrain
Management/Computers and Control Systems/Oxygen Sensor/Service and Repair/Heated Oxygen Sensor Replacement - Bank 2 Sensor 1).
2. Remove the exhaust manifold heat shield bolts.
3. Remove the exhaust manifold heat shield.
Installation Procedure
