Malibu V6-3.6L (2010)
5. Install the blower motor resistor wire harness connector.
6. Install the blower motor wire harness connector.
7. Install the mode actuator wire harness connector.
8. Install the air temperature actuator wire harness connector.
9. Install the recirculation actuator wire harness connector.
10. Install the I/P assembly. Refer to Instrument Panel Reinforcement Replacement (See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Instrument Panel Reinforcement Replacement).
11. Install the heater hoses to the heater core. Refer to Heater Inlet Hose Replacement (See: Heater Hose/Service and Repair/Heater Inlet Hose
Replacement) and Heater Outlet Hose Replacement (See: Heater Hose/Service and Repair/Heater Outlet Hose Replacement).
12. Install the A/C lines to the thermal expansion valve. Refer to Air Conditioning Evaporator Thermal Expansion Valve Replacement (See:
Expansion Block/Orifice Tube/Service and Repair/Air Conditioning Evaporator Thermal Expansion Valve Replacement).
