Malibu V6-3.6L (2010)
9. Raise the fuel pump module up from the fuel tank. Tilt the module in order to allow the fuel level sensor arm and float to clear the module
opening.
10. Remove the fuel pump module.
11. Remove and discard the fuel pump module seal.
12. Clean the fuel pump module sealing surfaces.
Installation Procedure
Warning
Drain the fuel from the fuel sender assembly into an approved container in order to reduce the risk of fire and personal injury. Never store the fuel in an
open container
Note:
*
Some lock rings were manufactured with "DO NOT REUSE" stamped into them. These lock rings may be reused if they are not damaged or
warped.
*
Inspect the lock ring for damage due to improper removal or installation procedures. If damage is found, install a NEW fuel pump module.