Malibu V6-3.6L (2010)
9. Install the engine lift bracket (2) and bolts (1).
Tighten the bolts to 50 Nm (37 lb ft).
10. Clean any excess power steering fluid from the vehicle and remove the drain pans.
11. Install the drive belt idler pulley. Refer to Drive Belt Idler Pulley Replacement (See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts,
Brackets and Accessories/Idler Pulley/Service and Repair).
12. Install the power steering pump pulley. Refer to Power Steering Pump Pulley Replacement (See: Steering and Suspension/Steering/Power
Steering/Power Steering Pump/Service and Repair/Power Steering Pump Pulley Replacement).
13. Fill and bleed the power steering system. Refer to Power Steering System Bleeding (See: Steering and Suspension/Steering/Power
Steering/Power Steering Bleeding/Service and Repair).
