Malibu V6-3.6L (2010)
1. Position a NEW throttle body gasket to the upper intake manifold.
2. Position the throttle body to the upper intake manifold.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the throttle body bolts and tighten to 10 Nm (89 lb in).
4. Connect the engine wiring harness electrical connector (2) to the ETC.
5. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement (See: Air Cleaner Housing/Air Cleaner Fresh Air
Duct/Hose/Service and Repair/Air Cleaner Outlet Duct Replacement).
6. Perform the Throttle Learn Procedure. Refer to Throttle/Idle Learn (See: Testing and Inspection/Programming and Relearning/Throttle Learn).