Malibu V6-3.6L (2010)
1. Install the ignition coils.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the ignition coil bolts and tighten to 10 Nm (89 lb in).
3. Connect the engine wiring harness electrical connectors (2) to the ignition coils.
4. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (See: Fuel Delivery and Air Induction/Fuel Injector/Service
and Repair/Fuel Injector Sight Shield Replacement).
