Malibu V6-3.6L (2010)
Fluid Pressure Sensor/Switch: Service and Repair
Transmission Fluid Pressure Manual Valve Position Switch Replacement
Removal Procedure
1. Remove the transaxle case side cover.
2. Remove the TFP switch assembly bolts.
3. Remove the TFP switch assembly from the control valve body assembly. The TFP switch O-rings are reusable if not damaged and should remain
with the switch assembly.
Installation Procedure
1. Inspect the TFP switch assembly in order to verify the condition and correct location of the pressure switch O-rings. If necessary, replace the
O-rings.
Caution: Refer to Fastener Caution