Malibu V6-3.6L (2010)
Camshaft Position Sensor: Service and Repair
Camshaft Position Sensor Replacement - Bank 1 (Right Side) Exhaust
Camshaft Position Sensor Replacement - Bank 1 (Right Side) Exhaust
Removal Procedure
1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement (See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine
Performance Checks/Air Cleaner Housing/Service and Repair).
2. Disconnect the engine wiring harness electrical connector (6) from the bank 1 exhaust camshaft position (CMP) sensor.
3. Remove the CMP sensor bolt.
4. Remove the CMP sensor.
Installation Procedure
