Malibu V6-3.6L (2010)
2. File the lower hole until the outer flange slot matches the inner flange slot.
3. Connect the strut to the knuckle. Refer to Strut Assembly Replacement (See: Suspension/Suspension Strut / Shock Absorber/Service and
Repair/Front Suspension Strut/Strut Assembly Replacement).
4. Adjust the camber to specification by moving the top of the wheel in or out. Refer to Wheel Alignment Specifications (See: Specifications/Wheel
Alignment Specifications).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
5. Install the strut to knuckle nuts.
Tighten the nuts to 120 Nm (89 lb ft).
Front Caster Adjustment
Front Caster Adjustment
The front caster is not adjustable. If the front caster angle is not within specifications, inspect for suspension support misalignment or front suspension
damage. Replace any damaged suspension components as necessary.
Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment
Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment