Malibu V6-3.6L (2010)
4. Connect the power steering gear inlet hose and the power steering gear outlet hose to the steering gear. Install the power steering gear inlet hose
bolt and tighten to 27 Nm (20 lb ft).
5. Position the transmission rear mount and bracket in place.
6. Install the 3 rear transmission mount bracket nuts and tighten to 50 Nm (37 lb ft).
7. Install the 3 transmission rear mount bolts (1) and tighten to 90 Nm (66 lb ft).
8. Connect the HO2S electrical connector and clip the connector to the rear transmission mount bracket.