Malibu V6-3.6L (2010)
Hold the transmission range selector lever while removing or installing the lever retaining nut. Failure to hold the lever can cause damage to the
transmission internal park system components which could allow the vehicle to roll when placed in the park position.
4. Remove the transmission range selector lever nut (1).
5. Remove the transmission range selector lever (2).
Installation Procedure
Warning
Hold the transmission range selector lever while removing or installing the lever retaining nut. Failure to hold the lever can cause damage to the
transmission internal park system components which could allow the vehicle to roll when placed in the park position.
1. Install the transmission range selector lever (2).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the transmission range selector lever nut (1) and tighten to 30 Nm (22 lb ft).