Malibu V6-3.6L (2010)
2. Remove the transmission mount bracket to frame bolts (1).
3. Remove the transmission mount bracket (2).
Installation Procedure
1. Install the transmission mount bracket (2).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the transmission bracket to frame bolts (1) and tighten to 50 Nm (37 lb ft).
3. Install the rear transmission mount. Refer to Transmission Rear Mount Replacement (See: Transmission Rear Mount Replacement).
Transmission Mount Replacement - Left Side
Transmission Mount Replacement - Left Side
Removal Procedure
1. Remove the battery and tray. Refer to Battery Tray Replacement (See: Starting and Charging/Battery/Battery Tray/Service and Repair).
2. Using a floor jack and a block of wood, support the powertrain.