Malibu V6-3.6L (2010)
4. Remove the PNP switch lever nut and lever.
5. Remove the PNP switch. Refer to Park/Neutral Position Switch Replacement (See: Sensors and Switches - A/T/Transmission Position
Switch/Sensor/Service and Repair).
6. Remove the transmission upper side cover bolts.
7. Install the engine support fixture. Refer to Engine Support Fixture (See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Support Fixture).
8. Raise the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
9. Remove the left front tire and wheel. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair
).
10. Remove the left lower control arm. Refer to Lower Control Arm Replacement (See: Steering and Suspension/Suspension/Control Arm/Service
and Repair/Front Suspension).
11. Remove the wheel drive shaft from the transmission. Refer to Wheel Drive Shaft Replacement (See: Drive Axles, Bearings and Joints/Axle Shaft
Assembly/Service and Repair/Wheel Drive Shaft Replacement).
12. Disconnect the steering rack intermediate shaft. Refer to Steering Gear Replacement (See: Steering and Suspension/Steering/Steering
Gear/Service and Repair/Steering Gear Replacement).
13. Remove the frame. Refer to Frame Replacement (See: Body and Frame/Frame/Service and Repair).
