Malibu V6-3.6L (2010)
3. Reconnect the wheel speed senor electrical connector, if needed.
4. Install the wheel speed sensor electrical connector on the retaining bracket, if needed.
5. Install the brake rotor. Refer to Front Brake Rotor Replacement (See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service
and Repair/Removal and Replacement/Front Brake Rotor Replacement).
6. Install the wheel drive shaft retaining nut and washer. Refer to Wheel Drive Shaft Replacement (See: Axle Shaft Assembly/Service and
Repair/Wheel Drive Shaft Replacement).
7. Remove the support and lower the vehicle.