Malibu V6-3.9L (2007)
Front Bumper Bracket: Service and Repair
Front Bumper Impact Bar Replacement
Front Bumper Impact Bar Replacement
Removal Procedure
Caution: Refer to Approved Equipment for Collision Repair Caution.
1. Disable the SIR system. Refer to SIR Disabling and Enabling.
2. Disconnect the negative battery cable.
Important: This panel is replaced at factory welds
3. Remove all related panels and components.
4. Repair as much of the damage as possible.
5. Remove the sealers and anti-corrosion materials from the repair area, as necessary.
Important: Note the number and location of the factory welds for installation of the front impact bar.
