Malibu V6-3.9L (2007)
Rear Door Weatherstrip: Service and Repair
Rear Door Opening Weatherstrip Replacement
Rear Door Opening Weatherstrip Replacement
Removal Procedure
1. Remove the carpet retainer. Refer to Rear Carpet Retainer Replacement .
2. Remove the upper center pillar trim panel from the vehicle. Refer to Center Pillar Upper Garnish Molding Replacement .
3. Remove the rear lower quarter trim panel. Refer to Rear Quarter Lower Trim Panel Replacement .
4. Remove the rear upper quarter trim panel. Refer to Rear Quarter Upper Trim Panel Replacement (Extended Sedan) .
5. Pull the rear door opening weatherstrip (2) loose.
6. Remove the weatherstrip (2) from the vehicle.
Installation Procedure
1. Apply weatherstrip (2) adhesive GM P/N 12345096 (Canadian P/N 993365) or equivalent, to the rear door opening weatherstrip.
2. Press the rear door opening weather-strip (2) onto the rear door opening flange.
3. Install the carpet retainer. Refer to Rear Carpet Retainer Replacement .
4. Install the upper center pillar trim panel in the vehicle. Refer to Center Pillar Upper Garnish Molding Replacement .
5. Install the rear lower quarter trim panel. Refer to Rear Quarter Lower Trim Panel Replacement .
6. Install the rear upper quarter trim panel. Refer to Rear Quarter Upper Trim Panel Replacement (Extended Sedan) .
