Malibu V6-3.9L (2007)
10. Remove the rear door window regulator from the rear door.
Installation Procedure
1. Install the rear door window regulator and the motor to the door.
Notice: Refer to Fastener Notice.
2. Install the regulator mounting bolts (1).
Tighten the rear door window regulator bolts to 10 N.m (89 lb in).
3. Connect the electrical connector.
4. Remove the tape from the rear door window.
5. Lower the rear door window far enough to install the door window.
6. Install the bolts to the rear door window regulator (1, 2).