Malibu V6-3.9L (2007)
Trunk / Liftgate Striker: Service and Repair
Liftgate Latch Striker Replacement
Liftgate Latch Striker Replacement
Removal Procedure
1. Open the liftgate.
2. Remove the screws from the liftgate striker.
3. Remove the liftgate striker from the vehicle.
Installation Procedure
1. Align the liftgate striker to the holes in the liftgate
Notice: Refer to Fastener Notice.
2. Install the liftgate striker retaining bolts.
Tighten the bolts to 25 N.m (18 lb ft).
3. Close the liftgate.