Malibu V6-3.9L (2007)
6. Install the power seat switch adjuster button.
7. Install the side shield fasteners.
Tighten the fasteners to 2.5 N.m (22 lb in).
8. Install the recliner handle. Refer to Seat Back Recliner Handle Replacement - Front .
Rear Seat Cushion Cover and Pad Replacement
Rear Seat Cushion Cover and Pad Replacement
Removal Procedure
1. Remove the seat back cover and pad.
2. If you are replacing the 60 percent side, perform the following steps:
1. Remove the center seat belt retractor.
2. Remove the seat back hinge trim.
3. Release the J-straps and remove the rear cushion closeout.