Malibu V6-3.9L (2007)
Tighten the bolts to 10 N.m (89 lb in).
3. Remove the cap from the brake hose end.
4. Assembly the 2 new copper brake hose gaskets and the brake hose banjo bolt to the wheel cylinder.
Tighten the brake hose banjo bolt to 50 N.m (37 lb ft).
5. Connect the wheel speed sensor connector if equipped with ABS and install the upper control arm bolt and nut.
Tighten the nut to 180 N.m (133 lb ft).
