Malibu V6-3.9L (2007)
14. Disconnect the brake pedal pushrod retaining clip (1) the wave washers (2) and the brake booster pushrod (3) from the brake pedal pin (4).
Tilt the vacuum brake booster slightly in order to work the booster pushrod off the brake pedal pin. Do not apply excessive side pressure on the
pushrod.
15. Remove the booster from the vehicle.
Installation Procedure
1. Install the booster to the vehicle.
2. Tilt the vacuum brake booster slightly in order to work the booster pushrod onto the brake pedal pin. Do not apply excessive side pressure on the
pushrod. Align the pushrod with the pedal and assemble.
3. Connect the brake pedal pushrod retaining clip (1) the wave washers (2) and the brake booster pushrod (3) to the brake pedal pin (4).