Malibu V6-3.9L (2007)
9. Connect the oil level sensor electrical connector.
10. Install the frame. Refer to Frame Replacement (W/L61), (W/LZ9, LZ4).
11. Position the A/C compressor and install the bolts.
Tighten the bolts to 50 N.m (37 lb ft).
12. Install the starter. Refer to Starter Motor Replacement (L61), (LZ4), (LZ9).
13. Ensure that the oil pan drain plug is tighten.
Tighten the drain plug to 26 N.m (19 lb ft).
14. Lower the vehicle.
15. Fill the crankcase.
16. Connect the negative battery cable.
