Malibu V6-3.9L (2007)
34. Remove the throttle body bolts/studs and throttle body.
35. Remove the MAP sensor bracket and sensor (1).
36. Remove the EVAP canister purge solenoid valve bolt (2) and valve (3).
37. Clean the upper intake to lower intake gasket mating surfaces.
38. Inspect the intake manifold tuning valve seal for damage. The tuning valve blade attachment to the motor should be tight, with no looseness or
slack present, Replace as necessary.
39. Apply lubricant to the nose of the valve blade (1). Refer to Sealers, Adhesives, and Lubricants for the correct part number.
Installation Procedure
