Malibu V6-3.9L (2007)
Discharge Air Temperature Sensor / Switch: Service and Repair
Air Temperature Sensor Replacement - Upper
Air Temperature Sensor Replacement - Upper
Removal Procedure
1. Remove the left closeout panel.
2. Remove the knee bolster.
3. Twist and pull the upper air temperature sensor from the upper right air outlet duct.
4. Remove the upper air temperature sensor wire harness connector.
Installation Procedure
1. Install the upper air temperature sensor wire harness.
2. Install the upper air temperature sensor.
3. Install the knee bolster.
4. Install the left closeout panel.