Malibu V6-3.9L (2007)
Hose/Line HVAC: Service and Repair
Suction Hose Replacement
Suction Hose Replacement
Tools Required
J 39400-A Halogen Leak Detector
Removal Procedure
1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging.
2. Insert 2 small screwdrivers into the 2 slots of the compressor hose and suction line connector and release locking tabs.
3. Remove the compressor hose and liquid line connector.
4. Remove the suction hose from the compressor hose.
5. Remove and discard the O-rings.
6. Remove the surge tank from the surge tank bracket.
7. Remove the suction hose and liquid line nut from the thermal expansion valve (TXV).
8. Remove the suction hose and liquid line from the TXV.
9. Remove the suction hose from the dash clip.
10. Remove the line clip from the dash.
11. Remove the refrigerant pressure sensor wire harness connector.
12. Remove the liquid line bracket bolt.