Malibu V6-3.9L (2007)
9. Remove the fuel injector retaining clip (1), if required.
10. Remove the fuel injector (3) from the fuel rail, if required.
11. Remove and discard the fuel injector upper O-ring (2).
Installation Procedure
Important: DO NOT reuse the fuel injector O-ring seals. Install NEW O-ring seals during assembly.
Important: Ensure to use the correct part number when ordering the replacement fuel injectors.
1. The fuel injector (1) is stamped with a part number identification (2).
2. Lubricate the NEW injector O-rings (2) with clean engine oil.
3. Install the NEW fuel injector upper O-ring (2).
4. Install the fuel injector (3) to the fuel rail, if required.
5. Install the fuel injector retaining clip (1), if required.
Notice:
*
Use care when servicing the fuel system components, especially the fuel injector electrical connectors, the fuel injector tips, and the injector
O-rings. Plug the inlet and the outlet ports of the fuel rail in order to prevent contamination.
