Malibu V6-3.9L (2007)
Wiper Control Module: Service and Repair
Wiper Drive System Module Replacement
Removal Procedure
Important: The new wiper drive system module does not include the wiper motor nor the motor support bracket. You must install the old
components to the new wiper system module.
1. Remove the wiper arms.
2. Remove the air inlet grille panel.
3. Remove the fasteners attaching the wiper module to the plenum.
4. Carefully lift the wiper module out of the plenum.
5. Disconnect the electrical connector from the wiper motor.
6. Disconnect the clip retaining the electrical harness to the wiper module.
7. Remove the wiper module assembly from the vehicle.