Malibu V6-3.9L (2007)
4. Adjust the camber to specification by moving the top of the wheel in or out. Refer to Wheel Alignment Specifications.
Notice: Refer to Fastener Notice.
5. Install the strut to knuckle nuts.
Tighten the nuts to 120 N.m (89 lb ft).
6. Re-calibrate the steering wheel position sensor. Refer to Control Module References See: Testing and Inspection/Programming and Relearning
Front Caster Adjustment
Front Caster Adjustment
The front caster is not adjustable. If the front caster angle is not within specifications, inspect for suspension support misalignment or front suspension
damage. Refer to Alignment Checking. Replace any damaged suspension components as necessary.
Front Toe Adjustment
Front Toe Adjustment
1. Ensure that the steering wheel is set in a straight ahead position.
2. Loosen the tie rod jam nut (5).
3. Adjust the toe to specification by turning the adjuster (6). Refer to Wheel Alignment Specifications.
