Malibu V6-3.9L (2007)
1. Loosen the inner lower control arm cam bolt nuts.
2. Rotate the cam bolts to the required camber specification setting. Refer to Measuring Wheel Alignment.
Notice: Refer to Fastener Notice.
3. Maintain the camber setting while tightening the cam bolt nuts.
Tighten the inner lower control arm (front) bolt nut to 110 N.m (81 lb ft).
Important: Check the toe setting AFTER changing camber or caster.
4. Check the camber setting after tightening.
5. Adjust the camber setting if necessary.
Rear Toe Adjustment
Rear Toe Adjustment
1. Loosen the inner toe link cam bolt and nuts.
2. Rotate the cam bolt to the required toe specification settings. Refer to Measuring Wheel Alignment.
Notice: Refer to Fastener Notice.
3. Maintain the toe setting while tightening the cam bolt nut.
Tighten the rear suspension adjustment link lock nut to 110 N.m (81 lb ft).
4. Check the toe setting after tightening.