Malibu V6-3.9L (2007)
1. Remove the case side cover.
2. Disconnect the 2-3 shift solenoid electrical connector.
3. Remove the 2-3 shift solenoid retaining clip (314C).
4. Remove the 2-3 shift solenoid (315B) and the O-ring (316).
Installation Procedure
1. Install the O-ring (316) and the 2-3 shift solenoid (315B).
2. Install the 2-3 shift solenoid retaining clip (314C).
3. Connect the 2-3 shift solenoid electrical connector.
Important: It is recommended that transmission adaptive pressure (TAP) information be reset.
Resetting the TAP values using a scan tool will erase all learned values in all cells. As a result, The ECM, PCM or TCM will need to
relearn TAP values. Transmission performance may be affected as new TAP values are learned. Reset the TAP values. Refer to
Transmission Adaptive Functions.
4. Install the case side cover.
