Malibu V6-3.9L (2007)
Case: Service and Repair
4T65-E - Automatic Transaxle
Case Side Cover Replacement
Tools Required
J 36850 Transjel Lubricant
Removal Procedure
1. Remove the air cleaner outlet duct.
2. Remove the battery.
3. Remove the shift cable from the transaxle range selector.
4. Remove the transaxle shift cable bracket bolts and the bracket from the transaxle.
5. Disconnect the transaxle wiring harness connector.
6. Remove top side cover bolt (56, 58).
7. Install the engine support fixture.
8. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
9. Remove the left front wheel.
10. Remove the inner fender liner.
11. Remove the wheel speed sensor harness from retainers on lower control arm.
12. Remove the left transaxle mount.
13. Remove the front cradle to radiator support brackets on each side.
