Malibu V6-3.9L (2007)
4. Crimp the eared clamp (6) using J 35910 , a torque wrench (8), and a breaker bar (9).
5. If equipped, install the spacer ring (2) into the groove of the halfshaft bar using J 8059 .
4. Crimp the eared clamp (6) using J 35910 , a torque wrench (8), and a breaker bar (9).
5. If equipped, install the spacer ring (2) into the groove of the halfshaft bar using J 8059 .