Malibu V6-3.9L (2007)
Installation Procedure
1. Connect the solvent container washer hose to the washer pump.
2. Install the solvent container washer hose to the washer solvent container. Ensure that the hose is routed within the channel on the side of the
washer solvent container and snapped into the retaining features on the container.
3. Route the hoses upward and into the solvent container clips.
4. Connect the washer hose and electrical harness to the washer pump.
5. Install the fender liner.
6. Connect the solvent container washer hose to the windshield washer hose.
7. Fill the washer solvent container with washer solvent.
8. Close the hood.
9. Inspect the washers for proper operation.
