Malibu Classic L4-2.2L (2008)
Rear Door Striker: Adjustments
Door Lock Striker Adjustment
Tools Required
J 39346Mini-Wedge Door Striker Aligner
Important: The door must be properly aligned before adjusting the striker.
1. Open the door.
2. Loosen the striker screws just enough to allow the movement of the door striker.
3. Install the J 39346.
Important: Do not slam the door.
4. Close the door while holding the outside the handle in the open position.
5. Open the door.
Notice: Refer to Fastener Notice.
6. Tighten the striker screws.
Tighten the striker screws to 25 N.m (18 lb ft).
7. Remove the J 39346.
8. Close the door.