Malibu Classic L4-2.2L (2008)
*
For the sedan emblem/nameplate, install to the following dimensions:
*
Dimension (a) is 76 mm (3.02 in) from the left edge of the rear compartment lid applique to the nameplate.
*
Dimension (b) is 97.6 mm (5.83 in) from the bottom feature line of the rear compartment lid applique to the nameplate.
*
For the coupe emblem/nameplate, install to the following dimensions:
*
Dimension (a) is 22 mm (0.88 in) from the top of the applique to the bottom of the nameplate.
*
Dimension (b) is 38 mm (1.5 in) from the edge of the rear compartment lid to the side of the nameplate.
*
Dimension (c) is 125 mm (5 in) from the edge of the deck lid to the edge of the nameplate.
4. Use a heat gun to heat the mounting surface to approximately 27-41°C (80-105°F).
5. Ensure that the temperature of the emblem/nameplate is approximately 29-32°C (85-90°F).
Important: Do not touch the adhesive backing on the emblem/nameplate.
6. Remove the protective liner from the back of the emblem/name plate.
7. Position the emblem/nameplate to the location marks and press the emblem/nameplate to the mounting surface.
8. Apply equal pressure along the emblem/nameplate to uniformly bond the item to the mounting surface.
9. Remove the protective tape from the mounting surface.
Rear Compartment Lid Emblem/Nameplate Replacement (SS Extended Sedan)
Rear Compartment Lid Emblem/Nameplate Replacement (SS Extended Sedan)
