Metro L3-061 1.0L VIN 6 TBI (1998)
Brake Pedal Assy: Testing and Inspection
1. Start the engine.
2. Press the brake pedal (1) several times.
3. Hold the brake pedal with approximately 30 kg (66 lbs) of pressure.
4. Measure the brake pedal-to-floor clearance. If the clearance is less than 60 mm (2.36 inches), perform the following procedures:
^
Inspect the drum brake linings.
^
Bleed the brakes.
^
Inspect the vacuum booster pushrod clevis length.
