Metro L3-061 1.0L VIN 6 TBI (1998)
Brake Pad: Service and Repair
REMOVAL PROCEDURE
^
Tools Required
- J26900-1 Outside Micrometer
1. Siphon two-thirds of the fluid from the master cylinder reservoir.
2. Raise the vehicle. Support the vehicle.
3. Remove the tire and wheel assembly.
4. Position the C-clamp around the outer pad and caliper. Tighten the clamp until the piston bottoms in its bore.
5. Remove the two caliper mounting bolts.
6. Remove the caliper (2) from the caliper carrier. Suspend the caliper with a wire (1) in order to prevent damage to the brake hose.