Metro L3-061 1.0L VIN 6 TBI (1998)
Brake Caliper: Service and Repair
Brake Caliper Bracket Replacement
REMOVAL PROCEDURE
1. Remove the linings.
2. Remove the two bolts and the caliper carrier from the vehicle.
3. Remove the two caliper pins, with the boots, from the caliper carrier (1).
INSTALLATION PROCEDURE
1. Lubricate the caliper pins with silicone grease.
2. Install the two caliper pins, with the boots, to the caliper carrier.
NOTICE: Refer to Service Precautions.
3. Install the caliper carrier to the vehicle. Secure the carrier with two bolts.
^
Tighten the caliper carrier bolts to 40-60 Nm (29-43 ft. lbs.).
4. Install the linings.
