Metro L3-061 1.0L VIN 6 TBI (1998)
1. Lubricate the caliper mounting with silicone grease.
NOTICE: Refer to Service Precautions.
2. Install the caliper to the caliper carrier. Secure with two caliper mounting bolts.
^
Tighten the caliper mounting bolts to 30 Nm (22 ft. lbs.).
3. Install the brake hose union bolt with new washers.
^
Tighten the brake hose union bolt to 23 Nm (17 ft. lbs.).
4. Install the tire and wheel assembly.
5. Lower the vehicle.
6. Fill the master cylinder fluid reservoir.
7. Bleed the brake system.
Brake Caliper Overhaul