Metro L3-061 1.0L VIN 6 TBI (1998)
Temperature Gauge: Service and Repair
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
1. Disconnect the negative battery cable.
2. Remove the instrument cluster from the instrument panel.
3. Push on the tabs in order to remove the cluster lens (7) and the bezel assembly (6) from the cluster housing.
4. Remove the 3 screws (4) that secure the temperature gauge to the cluster housing.
5. Remove the temperature gauge (4) from the cluster housing (3).
INSTALLATION PROCEDURE
